[ Pobierz całość w formacie PDF ]

- How to remove the Pickup Unit
1.Unscrew 2 pieces of screws, then remove the Pulley Grease Application Pickup Unit
Grease Application
Cover.
Belt
2.Remove the Feed Screw unit from the pawl of the
Feed Screw Guide (The pawl is located inside the
guide).
3.Remove the belt from the Pulley, then remove the
Pickup unit.
Pulley Cover
(Caution)
Make sure not to stain the belt with grease when you
fix the belt.
Feed Screw Guide
Grease Application
29
CX-977
- How to remove the Load Carriage Motor Assy
1.Unscrew the screw (1 piece).
2.Remove the Load Carriage Motor Assy.
Load Carriage
Motor Assy
Grease Application
- How to remove the Clamp Arm Assy
Clamp-Up Lever
1.Unlock springs (3 pieces).
2.Remove the Clamp-Up Lever.
Clamp Arm Assy
3.Remove the Assy in such way that; you shift the Assy
to the left side direction while you rotate it to the
Spring
upper direction slowly.
Spring
Spring
- How to remove the Spindle Motor
1.Unscrew 2 pieces of screws. Then you can remove
the motor.
Spindle Motor [ Pobierz całość w formacie PDF ]

zanotowane.pl

doc.pisz.pl

pdf.pisz.pl

chiara76.opx.pl